INSTALLATION INSTRUCTIONS
Installation
•If you have purchased the model without the stand attached: When installing the monitor, use the optional stand CMPAD42T. The desktop stand has been used for the installation in this manual.
•Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning or dropping and result in fire, electrical shock or injury. Please note that our company assumes absolutely no responsibility for personal injuries or property damage caused by use of other mount units or improper installation.
•Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible.
•In order to prevent an internal temperature increase, maintain a space of 10cm (4 inches: For a desktop
•Using a commercially available cord, chain and clamp, secure the set to a firm wall or pillar.
10cm (4 inches) or more*
Cord or chain Wall or pillar
Clamp
Hook
Cord or chain
PRECAUTIONS
Please avoid installing the TV directly on the wooden floor. Depending on the quality and condition of the floor, the desktop stand may stick to the floor face, and the surface could come off when the TV is lifted up.
Read SAFETY INSTRUCTIONS ( 5 to 8 ) carefully to ensure maximum safety before proceeding to these steps:
•Choose an appropriate site and install the product on a level table where the stand is secure.
•Install the PDP TV to have ready access to a power socket available.
•Make sure that the power switch of this device is turned off.
19
