![](/images/new-backgrounds/1305370/30537093x1.webp)
OTHER FUNCTIONS
Audio Switching
A2 / Sound Multiplex (TV mode)
•The I/II button in remote control is useful for sound multiplex signal. Otherwise pressing this button will have no effect.
BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears as shown on right. Press the I/II button to select the sound to be heard.
Each time the button is pressed, [I]Language A, [II]Language B or
Sound multiplex signal received
[I]
[II]
STEREO sound broadcast
When a stereo program is received, sound mode display will appear, and you can press the I/II button to select between stereo and mono sound.
Each time the button is pressed, ▼ Mono or Stereo appear cyclically on the screen. When receiving NICAM signals, NICAM display will appear as below.
Sound multiplex signal received
▼
Monaural sound broadcast
When a monaural program is received, sound mode display will appear.
NOTE
• If sound signal is not strong enough for quality reception, press the I/II button until ▼appears on the screen to receive a clear mono sound.
•If sound has hiss noise or keep switching between stereo and mono mode due to signal condition, press the I/II button until ▼appears on the screen to receive a clear mono sound.
43