THE REMOTE CONTROL (CLU-413UI)

- 18 -

When you are in a dark room, press this button on the side of the remote to light up the buttons shown in ￿. The light will stay on for about 8 seconds if the light button is not pressed again. These buttons will not appear to light if the room is too bright.

￿ PRECODED VCR BUTTONS

These buttons always transmit the chosen precoded VCR codes.

￿ TV/VCR BUTTON

When the remote is in the TV or VCR mode, this is the TV/VCR button. When the remote is in the CABLE mode, this is the A/B button.

￿ SELECT BUTTON

When the remote is in the VCR mode, this button is used to set up the remote to transmit the VCR's remote codes. When the remote is in the CABLE mode, this button is used to set up the remote to transmit the Cable Box's remote codes.

(Refer to P. 20 and P. 21 for more information)

Click to see Remote

￿ POWER button

Press this button to turn the TV set on or off. If an automatic message is set, it will be displayed when the TV is first turned on. (See page 32.)

￿ RECALL button

When you want to check the channel being received, or if it has a stereo (ST) or second audio program (SAP), press the RECALL button.

You can also check the time, and if the ON TIME or OFF TIME has been set. (See page 31.)