Hitachi 50HDA39 important safety instructions From DTV

Rear Panel Connections

Connecting a DTV receiver/set-top box with component video and a VCR

This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV and TV programs.

Your TV has component video inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism.

From Antenna		Stereo VCR	From DTV	DTV Receiver with Component video
			Antenna
RF IN	INPUT	OUTPUT	VIDEO RF OUT	RF IN	COMPONENT OUT
	R L	VIDEO R L			Pr	Pb	Y
			OUTPUT			OUTPUT
			R	L VIDEO		R	L VIDEO

TV back panel

Note:

You can connect the component video cables to either set of Component 1 or Component 2 jacks on the TV .

The Component 1 or Component 2 jacks and HDMI-1 and HDMI-2 jacks can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems.

If your DTV receiver does not have compo- nent video, use the S-video and standard audio connections instead. Do not connect both an S-video and a standard video cable to VIDEO-1 (or VIDEO-2) at the same time or the picture performance will be unacceptable.

For an HDMI connection, see page 13.

11

First time use

3X80801A_En_p10-17 11 7/12/06, 10:42 AM