Hitachi 50HDA39 important safety instructions Setting the on timer, Setting the sleep timer

Setting up your TV

Using the TV’s Features

Setting the ON timer

This feature allows you to program the TV to turn on automatically
at a set time. If you program the ON TIMER to “DAILY,” the TV will					￿￿￿￿￿￿					￿￿￿￿￿
turn on every day at the same time to the same channel until you
clear the ON TIMER.						￿￿	￿￿￿￿
					￿￿￿!￿￿
To set the ON timer: (Example: Turning on the TV to channel 2
at 6:30 AM, DAILY)					￿￿￿￿￿￿￿					￿￿"#!￿￿
1.	Press TV to select the TV mode.
2.	Set the clock, if you have not already done so (see page 29.)				￿￿￿￿￿￿￿￿￿					￿￿
					￿￿￿￿￿			￿￿￿￿￿	￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿
3.	Press MENU, then press or			to display the CUSTOMIZE
	menu.
4.	Press ▲ or ▼ to highlight ON TIMER.
5.	Press	or	to highlight SET, then press ENTER. The ON
	TIMER menu appears. Press			to set the time.
					￿￿￿$￿￿				￿￿￿￿!	"￿￿￿#	!￿￿￿￿￿
6.	Press ▲ or ▼ to set the desired hour, then press .
					￿￿"%$￿￿					￿￿￿￿￿￿￿￿￿
7.	Set the desired minutes and channel, as in step 6.
8.	Press	or	to select ONCE or DAILY, then press ENTER.
9.	Press EXIT to return to normal viewing.

To cancel the on timer:

Select CLEAR in step 8, above.

Note:

After a power failure or disconnection of the power, the timer settings will be lost.

Setting the sleep timer

You can use the sleep timer to automatically turn off the TV at a set time.

To set the sleep timer:

Repeatedly press SLP on the remote control to set the length of time until the TV turns off. The clock will increase 10 minutes for each press of the SLP button (0h00m, 0h10m, ...1h50m, 2h00m.) After the sleep timer is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.

To confirm the sleep timer setting:

Press SLP one time. The remaining time will be momentarily displayed.

To cancel the sleep timer:

Repeatedly press SLP until the display turns to 0h00m.

30

3X80801A_En_p30-39 30 7/11/06, 8:07 PM