Point your Remote at this area when selecting channels, adjusting volume, etc.

1￿ MAGIC FOCUS

Use this button to adjust your picture quality to optimum performance. (See page 39)

￿ ADJUSTMENT MODE button

This button is for service technicians only. DO NOT press this button. If this button is accidentally pressed, please turn off your television using the front panel power button. Your TV will operate normally when you turn it on again.

FRONT INPUT JACKS (for VIDEO :3)

Use these audio/video jacks for a "quick" hook-up from a camcorder or VCR to instantly view your favorite show or new recording. (Press the AVX button until VIDEO: 3 appears in the top right corner of the TV screen.)

FRONT PANEL JACKS AND CONNECTIONS

The front panel jacks are provided as a convenience to allow easily connect a camcorder or VCR:

NOTE: Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal. If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable.

REAR PANEL JACKS

Click to see Rear Panel Jacks.

￿ Antenna Input / Output

The "ANT" button on the remote control allows you to switch between two separate 75- Ohm RF antenna inputs, Main (VHF/UHF) and Auxiliary (AUX). The antenna output labeled "To converter" allows the Main (VHF/UHF) antenna connection to pass directly to a different source such as a pay-TV cable decoder.