Click to see the Remote.

￿ ANT button

Use the ANT (Antenna) button to select between the VHF/UHF and AUX (Auxiliary) antenna inputs.

NOTE: When VHF/UHF is selected, the channel number in the upper right corner of the screen is green. When the AUX input is selected, the channel number is in yellow.

￿ MENU, ENTER, CURSOR buttons

All the on-screen display features can be set or adjusted by using these buttons. The "MENU" button will start or exit the on-screen display.

The "CURSOR" buttons will highlight functions or adjust different features. The "ENTER" button will set features to your preference.

￿ CHANNEL SELECTOR buttons

"CHANNEL SELECTOR" buttons are used to set the time, for channel memory, etc.. Channel selection may also be performed by pressing channel up () or down ().

NOTE: The TV may not receive some channels if you are not in the correct AIR/CABLE mode. (See page 29)

￿ AVX button

The AVX (Auxiliary Video) button will select between the antenna signal and the three sets of video input jacks each time the button is pressed. If the Picture-in-Picture (PIP) is on, the AVX will select between the three sets of video input jacks. (See page 21)