Front Panel Controls
POWER Light
When the TV is turned ON, the Power Light will first blink to indicate that the television lamp is warming up. This light will be ON during normal operation. When the TV is turned OFF, the Power Light will blink to indicate that the television lamp will be cooling down and the light will eventually turn off.
TEMP Indicator
This light is off during normal operation. If this indicator is lit, the optic unit is too hot. If this indicator is blinking, the cooling fan has stopped. Please call service. The optic unit has an air filter that may become clogged over time. The internal termperature will increse which will trigger the temperature sensor to display an
LAMP Indicator
This light is off during normal operation. If light is lit, the lamp has failed. See page
First time use
NOTES: |
|
|
|
| |
1. | INDICATOR |
| INDICATION | MEANING |
|
|
|
| |||
|
|
| LIGHT ON | NO LAMP LIGHT |
|
|
|
|
| or BROKEN LAMP |
|
| LAMP LED |
| BLINKING | WRONG LAMP UNIT |
|
|
|
|
| ASSEMBLY / LAMP |
|
|
|
|
| DOOR OPEN |
|
| TEMP |
| LIGHT ON | Too hot inside the |
|
|
|
| OPTIC unit |
| |
| LED |
| BLINKING | COOLING FAN STOPPED |
|
|
|
|
| ||
|
|
| INTERMEDIATE BLINKING | BEGINNING OF WARM UP |
|
| POWER |
| (0.5 SEC CYCLE) | AFTER THE POWER ON. |
|
| LED |
| LIGHT ON | NORMAL OPERATION |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| SHORT BLINKING | BEGINNING OF COOL DOWN |
|
|
|
| (0.3 SEC CYCLE) | (FOR 20 SEC.) |
|
|
|
|
|
| |
|
|
|
| (TV CANNOT ACCEPT ANY CODE |
|
|
|
|
| IN THIS PERIOD EXCEPT WITHIN |
|
|
|
|
| THE BEGINNING 5 SEC.) |
|
|
|
|
|
|
|
|
|
| LONG BLINKING | COOL DOWN |
|
|
|
| (1 SEC CYCLE) | (FOR 6 MINUTES) |
|
(TV CAN ACCEPT REMOTE CONTROL AND SIDE BUTTONS)
ACTION
Need to replace if
LAMP still does not light by ìPower On” again.
Check assembly condition of
LAMP UNIT
Call for Service
2.If the LAMP, TEMP, and POWER LED are blinking in the order below, the television is warming up.
POWER TEMP LAMP
3.Your Hitachi LCD Rear Projection Television may appear to be OFF when it is set to input 1 ~ input 5 and the video signal is not received from the input jacks. Please make sure the Blue Power light indicator is not lit (OFF) when you are not watching for long lasting performance.
4.Your Hitachi LCD Rear Projection Television has an internal lamp that lights up the TV screen. Make sure to turn off the Power when you do not watch the LCD Rear Projection Television for longer lamp life.
9
