time use
Connecting External Video Sources
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your TV set is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire.
First
BEFORE OPERATING
EXTERNAL VIDEO SOURCE
INPUTS
Connect an external source to the INPUT terminal, then press the INPUTS button to show the INPUTS menu. Use the CURSOR PAD to select the CABLE, AIR or INPUT of your choice. Then press the SELECT button to confirm your choice (see page 23).
NOTE: When the TV is set to VIDEO and a video signal is not received from the VIDEO INPUT JACK on the back panel of the TV (i.e., VCR/laserdisc player, etc. is not connected or the video device is OFF), the set will appear to be OFF.
Input 3
Input 4
Input 5
Cable
Air
Move SEL Select
CONNECTING A COMPOSITE VIDEO AND MONAURAL AUDIO SOURCE TO INPUT1 – INPUT5
| Apparatus Claims of U.S. | CableCARD™ |
|
|
|
| Patent Nos. 4,631,603; |
|
|
| |
CABLE | 4,577,216; 4,819,098; | (Top of card faces right) |
| ||
licensed for limited |
|
|
|
| |
| 4,907,093; and 6,381,747 |
|
|
|
|
| viewing uses only. |
|
|
|
|
|
|
|
|
|
|
Top faces
1. | Connect the cable from the VIDEO OUT of the VCR |
| or the laserdisc player to the INPUT (VIDEO) jack, |
| as shown on the TV set on the right. |
2. | Connect the cable from the AUDIO OUT of the |
| VCR or the laserdisc player to the INPUT |
Connect the Cable and/or Air cables
MONITOR OUT
S
I
AIR
Y/
VIDEO
Y/
VIDEO
Upgrade Card
HDMI INPUT 1
(MONO)/L(AUDIO) jack. |
3. Press the INPUTS button, then select INPUT 4 |
V
I
D
E
O
V
I
D
PB
PR
PB
PR
OPTICAL OUT
Digital Audio
from the INPUTS menu to view the program from |
the VCR or the laserdisc player. The VIDEO OSD |
label disappears automatically after approximately |
E
O
A U D I O
(MONO) |
| (MONO) |
| (MONO) |
|
|
|
|
|
TV AS CENTER
(MONO)
L 
R
four seconds. |
AUDIO | INPUT 1 INPUT 2 INPUT 3 INPUT 4 |
TO |
4. Select CABLE from the INPUTS menu to return to
the previous channel. | Audio Video |
OUTPUT | |
NOTE: The Input 3 can be used in the same manner | VCR |
as Input 4. |
|
16
