Setup
Set The Inputs
Use this feature to give a name to any of the five video inputs.
1. | Press the CURSOR PAD | , | to highlight the video |
| inputs. |
|
|
2. | Press the CURSOR PAD | , | to select your |
| choices. |
|
|
Note: The inputs labeled Gray out (Skip) or Hide (Skip) are disabled in the INPUTS selection.
INPUT 4 Auto Link
Use this function to automatically turn the TV on and tune to INPUT 4 when it detects a video signal to INPUT 4.
| Setup |
|
|
|
| Set The Menu Options | |||
OR | Set The Power Saving | |||
| Set The Inputs |
| ||
| Set The Closed Captions | |||
| Set The Output Terminals | |||
| CableCARD Information | |||
| Set The Quick Start Options | |||
| Reset The Software | |||
| Move |
| SEL | Select |
| Setup |
|
|
|
| Set The Inputs |
| ||
OR | Input1 | : | **** | |
| ||||
| Input2 | : | ||
| **** | |||
| Input3 | : | ||
| **** | |||
| Input4 | : | ||
| **** | |||
| Auto Link | : | Off | |
| Input5 | : | **** | |
|
|
| ||
| Move |
| SEL | Return |
1. Use the CURSOR PAD , , or to highlight and select the AUTO LINK setting of your choice.
Auto
When AUTO is selected, the TV will turn on and switch to INPUT 4 automatically, when the INPUT 4 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player.
Remote
When REMOTE is selected, the TV will turn on and switch to INPUT 4 automatically when the INPUT 4 input device is turned on and the VCR, laserdisc, or DVD play button on your remote control is pressed. This is convenient when you want to record a movie with your VCR and watch it later.
Off
Select OFF to disable this function.
2.Press EXIT to quit menu or select AUTO LINK to return to previous menu.
NOTE: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described above.
2.When using REMOTE mode, any remote control button will substitute for your video input device play button. However, intended operation is for use with your VCR, laserdisc, or DVD play button.
3.If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after three hours.
On-Screen Display
51
