CONNECTING AV NETWORK
Your Hitachi LCD Rear PTV is equipped with an AV Network feature. This feature helps to control your external Audio/Video equip- ment (VCR, Set Top Box, DVD, etc.). Once this is setup, it allows your IR Mouse connector to control your equipment using your Hitachi LCD PTV Remote Control. You can use your Hitachi remote control to control the Audio/Video equipment command without the equipment’s remote control.
The LCD Rear PTV Rear Panel has 2 IR BLASTER jacks. Each IR Mouse cable can connect up to 2 external Audio/Video compo- nents. Therefore, you can connect the LCD Rear PTV with up to four components. Please see the following example of an AV Network setup between your Hitachi LCD Rear PTV and external Audio/Video equipment (VCR and DVD Player).
CONNECTING EXTERNAL AUDIO/VIDEO COMPONENTS TO IR BLASTER FOR AV NETWORK
1.Connect your external Audio/Video components to the Rear Panel shown on pages
2.Connect the IR Mouse cable to the IR BLASTER output of the Rear Panel.
3.Place the IR mouse in front of the infrared sensor of the external components you wish to control.
FIRST TIME USE
| ANT A |
|
|
|
|
|
|
|
|
| HDMI 1 |
| ANT B |
| INPUT 2 | INPUT 1 |
|
|
|
|
| ||
|
|
| Y/ | Y/ |
|
MONITOR OUT | INPUT 4 | INPUT 3 | VIDEO | VIDEO |
|
|
|
| |||
|
|
|
|
| |
|
|
| PB | PB |
|
|
|
| PR | PR | HDMI 2 |
VIDEO |
|
|
|
|
|
| (MONO) | (MONO) | (MONO) | (MONO) |
|
L |
|
|
|
| IR |
|
|
|
|
| BLASTER |
AUDIO |
| TV AS CENTER |
|
| |
R |
|
|
|
|
|
AUDIO |
|
|
|
|
|
TO |
|
|
|
|
|
CableCARD
(Top of card faces right)
IEEE1394 
OPTICAL OUT
Digital Audio
Upgrade Card
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; and 6,381,747 licensed for limited viewing uses only.
RS232C
1 2 3 4 5
6 7 8 9
|
|
| OUTPUT |
|
|
| Y | PB/CB PR/CR R | L |
V | L | R |
|
|
OUTPUT |
|
|
| |
Infrared 
Sensor 
IR
Mouse
Infrared 
Sensor
DVD Player
VCR
4.Press the AV NET button on the remote control. Use CURSOR PAD G or H to select and highlight the Device Setup
DVD
DVD2
VCR
VCR2
AV Receiver
POWER
MENU
MORE
Move INFO Device Setting
NOTES: 1. The Rear Panel has two IR BLASTER outputs which can control up to a total of four external components.
2.The IR Mouse must be placed in front of the external components infrared sensor for the AV Network to work.
3.The correct codes must be entered for each of the Audio/Video components for the AV Network to function properly.
4.Audio/Video component codes for AV network are on page
23
