Hitachi 50VX915, 70VX915, 60VX915 important safety instructions Lamp Replacemen

LAMP REPLACEMEN

6.Without installing the lamp cover, the power will be off and the Lamp Indicator will flash (see page 9). Be sure to install the lamp cover by re-engaging the two clips and tighten the screws before turning the power on, otherwise it may cause unusual colors.

PHILLIP HEAD

SCREW DRIVER

LAMP COMPARTMENT

NOTE: IF POWER IS CONNECTED BEFORE THE LAMP COVER IS INSTALLED, THE POWER WILL BE OFF AND THE LAMP INDICATOR WILL FLASH (SEE PAGE 9 ).

7.Plug power cord into AC outlet and turn on the main power switch.

120V

NOTE: This product contains lead and a lamp that contains mercury. Dispose of this product and its lamp in accordance with applicable environmental laws. For lamp recycling and disposal information, go to www.lamprecycle.org. For product recycling and disposal information, contact your local government agency or the Electronic Industries Alliance at www.eiae.org (in the US) or the Electronic Product Stewardship Canada at www.epsc.ca (in Canada).

For more information, call “1-800-HITACHI.”

LAMP REPLACEMENT

81