Hitachi 51F500 Audio Source, Selected, Internal Speakers, Auto Noise Cancel, Perfect Volume

AUDIO

Advanced Settings

Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.

Audio
Treble		50%
Bass		50%
Balance		L	R
Sound Enhancement
Advanced Settings
Move	SEL	Select

CURSOR

Audio
Advanced Settings
Audio Source
Stereo	Mono	2nd Audio Prog.
Internal Speakers
On	Off
Auto Noise Cancel
Perfect Volume
Loudness
Move SEL	Return

Press CURSOR	or to highlight a function. Press the SELECT button to select the function setting. When the function has a “✓” in
the box it is ON.

Audio Source

Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a weak stereo broadcast or SAP (second audio program) which may be a secondary language, weather report, etc.

The mode you select will be displayed at the left edge of the TV. The source received will be displayed above the mode. See example below for each selection when both stereo and second audio are received (monaural is always received).

STEREO SELECTED

Audio
	Stereo	Ant A 31
Selected
	ST/SA	NEWS
		10:00 PM

Audio

Broadcast

Internal Speakers

On - Select this feature if using the internal speakers only.

SAP SELECTED

SAP	Ant A 31
ST/SA	NEWS
	10:00 PM

MONO SELECTED

Mono	Ant A 31
ST/SA	NEWS
	10:00 PM

Off - Select this feature if you prefer to use only speakers from a separate stereo system.

Auto Noise Cancel

This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will automatically eliminate the audio for that channel.

Perfect Volume

This function will automatically adjust volume so each channel has the same average volume level.

Loudness

This function will improve the quality of both low and high frequency sounds when listening at low volume levels.

41