Set The Quick Start Options, Reset The Software

Setup

Set The Quick Start Options

This feature will select QUICK START UP options. Set this feature to ON to have the TV tune channels (both Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting ON for the QUICK START UP feature will activate the TV tuners circuits when the TV is in “standby mode” which is commonly referred to as “off”. This will allow you to quickly tune to channels when first turning the TV on. Digital signals often change and this feature will monitor any changes and prepare the television to quickly present a picture. A small amount of electricity is used to continually monitor signals when this feature is selected.

This feature also sets the IEEE1394 function in Stand By-mode to ON or OFF. Certain digital devices have a power save feature, in which the device automatically power OFF when not in use (sleep mode). Only by setting the IEEE1394 function in Stand-By mode to ON, will the TV be able to control a device that is in sleep mode.

NOTE: 1. By turning on the IEEE1394 function, your TV will no longer be set for power saving Stand- By mode. The IEEE Stand-By function must be set to OFF to return your TV set to power saving Stand-By mode.

2.When setting the Quick Start option to ON the option of Reset TV Settings will not operate.

	Setup
	Set The Menu Options
OR	Set The Screen Saver

	Set The Inputs
	Set The AV Net
	Set The Closed Captions
	Set The Output Terminals
	Set The Quick Start Options
	Reset The Software
	Move	SEL Select

HDX Models

	Setup
	Set The Quick Start Options
OR	Select ON to have the TV tune channels
	Select ON to have the TV tune channels
	quickly at 1st turn on and to use the IEEE1394

function in Stand-By-mode.

Select OFF to save electricity

Off On

Move	SEL Select

HDT Models

Setup

Set The Quick Start Options

Select ON to have the TV tune channels quickly at 1st turn on.

Select OFF to save electricity

Off On

Move	SEL Select

On-Screen Display

Reset The Software

This feature shows software information and easy upgrade procedure. This function allows the TV software to be upgraded by using a flash card (MMC CARD). If a future software upgrade is required for your TV, HITACHI will notify and provide you with a flash card. In order to receive written notification and the flash card, please complete and return the warranty card.