Hitachi 57T600 important safety instructions Connecting AN S-VIDEO Source to Input 3, 4

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5

1.Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below.

2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

4.Press the VID3~VID5 button to view the program from the VCR or laserdisc player. The VIDEO OSD label disappears automatically after approximately four seconds.

5.Press the ANT button to return to the previous channel.

FIRST TIME USE

ANT A

TO

CONVERTER

ANT B

AUDIO

TO HI-FI

CENTER

IN

IR

BLASTER

L

R

		DVI-HDTV
	PR	PB	Y
INPUT 1
	R	(MONO)/L
			AUDIO
	PR	PB	Y/VIDEO
INPUT 2	R	(MONO)/L
			AUDIO
	R	(MONO)/L	VIDEO	S-VIDEO
INPUT 3
	R	(MONO)/L	VIDEO	S-VIDEO
INPUT 4
			VIDEO	S-VIDEO
MONITOR
OUT

AUDIO

OPTICAL OUT Digital Audio

IEEE1394

Multi Media Card

ANT C

(DTV)

OUTPUT

R L V

S-VIDEO

VCR

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.A single VCR can be used for VCR #1 and VCR #2 (see page 11), but note that a VCR cannot record its own video or line output. Refer to your VCR operating guide for more information on line input-output connections.

17