Hitachi 57T600 important safety instructions IEEE-1394 Ant C

	SETUP
	Use this function to control your devices with digital interface capability. To quickly enter the IEEE1394
IEEE-1394
	menu, press the AV Net button on the remote control twice (2x) while in ANT C mode. To use this
	function, you need to be tuned to ANT C (see pages 64-65).

(When an IEEE1394 device is not connected)

Setup

Set The Inputs

Video1 Rename
Video2 Rename	THUMB
Video2 Auto Link	STICK
Video3 Rename	SELECT
Video4 Rename
Video5 Rename
IEEE-1394

Ant C
Move	[Please connect a Device....]

(When an IEEE1394 device is connected)

Setup

Set The Inputs

Video1 Rename

Video2 Rename

Video2 Auto Link

Video3 Rename

Video4 Rename

Video5 Rename

IEEE-1394

THUMB

STICK

SELECT

THUMB

STICK

Ant C
D-VHS	1
Move

ON-SCREEN DISPLAY

D-VHS	1	POWER	OFF	?	--:--:--
ANT C					00:00:00
		REC MODE:		HS	STD
Move		[MITSUBISHI HS-HD2000U]

Use THUMB STICK	to select connected devices (example: D-VHS1).
Use THUMB STICK	to highlight POWER.
Press down on THUMBSTICK to power ON the device.
Use THUMB STICK	, , , , to select D-VHS operation.,
Press down on THUMBSTICK to enable the selected operation.
Use THUMBSTICK ,	to select Ant C.
Use THUMBSTICK	to return to Ant C.

NOTES: 1. The digital device will be automatically recognized if properly connected. If there is no device connected to the IEEE1394 jacks, the On-Screen-Display will always show a note to connect the devices.

2.Four (4) IEEE1394 devices can be listed on the menu, but only 1 device at a time can be used. If a fifth device is connected, it will replace the first device on the menu list.

3.This TV’s IEEE1394 connection is not compatible with a DV camcorder (Digital Video Camcorder) or a PC.

4.This TV’s IEEE1394 connection will not support a digital device that goes into a POWER SAVE mode (Sleep mode). Before using a digital device, turn off it’s POWER SAVE feature.

5.The On-Screen-Display will not disappear until the AV Net button is pressed.

6.When an IEEE1394 device is disconnected, it will still be shown in the menu but will be grayed out.

7.Not all devices with IEEE1394 capability are compatible with this TV. Any compatibility problems with other manufacturers devices should be brought to the attention of those manufacturers.

68