FRONT PANEL CONTROLS

- 10 -

Used on all standard video and audio cables which connect to inputs and outputs located on the television's rear jack panel and front control panel.

This connector is used on camcorders, VCRs, and laser disc players with an S-Video feature in place of the standard video cable to produce a high-quality picture.

ANTENNA CONNECTIONS TO REAR JACK PANEL

VHF (75-Ohm) antenna/CATV(cable TV)

When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV coaxial cable to the ANT A (75-Ohm) terminal.

FOLIOHG2

<IMG SRC="ObjFDE.PCX">

VHF (300-Ohm) antenna/UHF antenna

When using a 300-Ohm twin lead from an outdoor antenna, connect the VHF or UHF antenna leads to screws of the VHF or UHF adaptor. Plug the adaptor into the antenna terminal on the TV.

When both VHF and UHF antennas are connected

Attach an optional antenna cable mixer to the TV antenna terminal, and connect the cables to the antenna mixer. Consult your dealer or service store for the antenna mixer.

FRONT PANEL CONTROLS

FRONT VIEW

click for image of front panel

1 MENU button

This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote.

2 AVX (Audio/Video) selector/ENTER button

Press this button to select the current antenna source, VIDEO: 1, or VIDEO 2. Your selection is shown in the top right corner of the screen. This button also serves as the ENTER button when in MENU mode.