PRELIMINARY RELEASE
Hitachi Lightning 9900™ V Series LUN Expansion and Virtual LVI/LUN User’s Guide 31
The Set SSID panel has the following features:
The SSID outline displays CU numbers (e.g., CU 00), SSID boundary areas (e.g., 00-3F),
and SSID (e.g., 0004).
---- indicates a boundary area with no SSID
indicates that the CU number is not extracted.
indicates that the CU number is extracted.
indicates the LDEV boundary area.
The SSID table is used to set the SSID boundary area.
– The CU column shows a CU number that contains an LDEV boundary with no SSID.
– The LDEV boundary column shows the boundary area of the LDEV number with no
SSID.
– The SSID field shows the smallest available SSID.
The Input SSID field is used to change the available SSID given in the SSID setting area.
The Set button will input the selected SSID in the "Input SSID" entry box.
The <<Before button will cancel the SSID setting and return you to one of the following:
If you are installing CVs, the Install CV Panel (2) (see Figure 4.10) will display or
if you are initializing VLL volumes, the Volume Initialize Panel (see Figure 4.14) will
display.
The Next>> button will take you to one of the following:
If you are installing CVs, the Install CV Confirmation Panel (see Figure 4.12) will display,
or
If you are initializing VLL volumes, the Volume Initialize Confirmation Panel (see
Figure 4.17) will display.
The Cancel button will cancel the SSID setting and return you to the VLL tab.