d

How to Install the Washing Machine

■■Make sure that the union nut between the water supply hose and main unit is tightly screwed.

■■Turn the tap on to check if the water supply hose is properly connected before starting. If it is loosely connected, water leakage may occur.

Drain hose

■■The drain hose should be placed higher than 60 cm above and not higher than 100 cm above the floor.

If the drain outlet is lower than 60 cm,

 

 

 

a joint pipe is necessary (additional

 

 

 

part, sold at a specialist outlet).

 

 

 

 

 

 

Secure the drain hose to prevent

60~100 cm

 

from slipping out from joint pipe.

 

 

 

 

Joint pipe

■■Do not bend, twist, crush or pull out, bend or step on the drain hose. Use the hose guide to prevent the drain hose from kinking.

■■Do not detach the drain hose from the rear panel of the washing machine.

Drainage into a wash basin (Using the packed-in hose guide) :

- Secure the drain hose to prevent it from slipping out of the wash basin.

- The wash basin outlet must not be sealed

by a plug.

- When water is being pumped out of the washing machine, check that the water drains away quickly enough.

Drainage into a siphon :

- Secure the connection point with 24-40 mm φ hose clip (Sold at a specialist outlet).

25

3WPL073501-1

Page 25
Image 25
Hitachi BD-W80MV installation instructions Drain hose