How to Install the Washing Machine

d

Make sure that the union nut between the water supply hose and main unit is tightly screwed.

Turn the tap on to check if the water supply hose is properly connected before starting. If it is loosely connected, water leakage may occur.

Drain hose

The drain hose should be placed higher than 60 cm above and not higher than 100 cm above the floor.

If the drain outlet is lower than 60 cm,

 

a joint pipe is necessary (additional

 

part, sold at a specialist outlet).

 

Secure the drain hose to prevent from

60~100 cm

slipping out from joint pipe.

 

 

Joint pipe

Do not bend, twist, crush or pull out, bend or step on the drain hose. Use the hose guide to prevent the drain hose from kinking.

Do not detach the drain hose from the rear panel of the washing machine.

Drainage into a wash basin (Using the packed-in hose guide) :

- Secure the drain hose to prevent it from

slipping out of the wash basin.

- The wash basin outlet must not be sealed

by a plug.

- When water is being pumped out of the washing machine, check that the water drains away quickly enough.

Drainage into a siphon :

- Secure the connection point with 24-40 mm φ hose clip (Sold at a specialist outlet).

25

3WPL079591-2

Page 25
Image 25
Hitachi BD-W80PAE installation instructions Drain hose