POWER button

START/PAUSE button

Jog Dial

Temperature button

)

SPIN button

QUICK button

INTENSIVE button

PREWASH button

EXTRA RINSE button

Control Panel and Display

POWER button

START/PAUSE button

Jog Dial

Temperature button

SPIN button

QUICK button

INTENSIVE button

PREWASH button

EXTRA RINSE button

TIMER button

LED multi function display

Press this button to switch power on and off. If no program is selected or no button is pressed for 10 minutes, the washing machine automatically switches itself off.

Press this button to start or pause a program. When the machine is paused for over 1 hour, the washing machine automatically switches itself off.

Turn this dial to select wash programs.

Enables temperature setting from cold up to 90ºC. When you select cold, the symbol is shown on the display and the heater switches off.

Enables spin speed setting from 0 (No Spin) to 1200r/min and Rinse Hold.

No Spin (display ) – The intermediate and final spinning are cancelled, and the water is drained out only. Recommended for delicate fabrics.

Rinse Hold (display ) – Laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing.

To unload, select the Spin or Drain program.

When washing lightly soiled items, this lets you slightly shorten the wash time of the selected program. The symbol is shown on the display. Wash time is shortened by 5-10 mins, but varies depending on the conditions.

Extends the washing time for more thorough washing. The symbol is shown on the display.

Prewashes heavily soiled items before the main wash. The symbol is shown on the display. Pour the detergent into the dispenser .

This lets you give washing an extra rinse. Recommended for areas with very hard water, when washing baby linen, and for people concerned about detergent residue.

The symbol is shown on the display.

7

3WPL079591-2

Page 7
Image 7
Hitachi BD-W80PAE installation instructions Control Panel and Display