ACCESSORIES AND ATTACHMENTS
RECOMMENDED ACCESSORIES
WARNING
Visit your Hardware Department or see the Power and Hand Tools Catalog to purchase recommended accessories for this power tool
WARNING
To avoid the risk of personal injury:
Do not use adjustable (wobble) type dadoes or carbide tipped dado blades; maximum dado width is 1/2" .
Do not use a dado with a diameter larger than 6" .
Do not use molding head set with this saw.
Do not modify this power tool or use accessories not recommended by Store.
TOOLS NEEDED FOR ASSEMBLY
TOOLS NEEDED
Medium screwdriver
Adjustable wrench
#2 Philips screwdriver
Straight edge | Combination square |
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
Separate all parts from packing materials. Check each part with the illustration on the next page and the "Table of Loose Parts" to make certain all items are accounted for, before discarding any packing material.
TABLE OF LOOSE PARTS
ITEM | DESCRIPTION | QUANTITY |
A. | Table saw assembly | 1 |
B. | Blade | 1 |
C. | Blade wrenches | 2 |
D. | Miter gauge | 1 |
E. | Hex key | 1 |
F. | Bolt, flat washer, toothed washer, 1 each | |
| Oval washer, spring washer |
|
G. | Blade guard and splitter | 1 |
H. | Rip fence | 1 |
I. | Rear table extension | 1 |
J. | Rear table extension tube | 2 |
K. | Location seat | 4 |
L. | Dome nuts | 2 |
M. | Hand wheels | 2 |
N. | Table extension | 1 |
O. | Dust collect elbow | 1 |
P. | Parallel washer hardware | 1 each |
WARNING
If any part is missing or damaged, do not attempt to assemble the table saw, plug in the power cord, or turn the switch ON until the missing or damaged part is obtained and is installed correctly.
STAND: |
|
|
Q. | Stand assembly | 1 |
R. | Hex. head bolts | 4 |
S. | Flat washers | 4 |
T. | Roller wheels | 2 |
U. | Square neck bolts | 2 |
V. | Nuts | 2 |
W. | Support rod | 1 |
X. | Batteries | 2 |
NOTE: To make assembly easier, keep contents of box together. Apply a coat of automobile wax to the table. Wipe all parts thoroughly with a clean dry cloth. This will reduce friction when pushing the workpiece. To avoid injury, the styrofoam block should be removed between the motor and the table.
— 7 —
