Husqvarna 250 R manual Contents, Note the following before starting, Key To Symbols, Introduction

CONTENTS

Contents
KEY TO SYMBOLS
Symbols	2
CONTENTS
Contents	3
Note the following before starting:	3
INTRODUCTION
Dear customer!	4
WHAT IS WHAT?
What is what on the clearing saw?	5
What is what on the clearing saw?	6
What is what on the clearing saw?	7
What is what on the clearing saw?	8
What is what on the clearing saw?	9
GENERAL SAFETY PRECAUTIONS
Important	10
Personal protective equipment	10
Machine′s safety equipment	11
Cutting equipment	14
ASSEMBLY
Assembling the handlebar and throttle	16
Fitting the handlebar	16
Transport position, handlebar	17
Fitting the handlebar	17
Assembling the cutting equipment	17
Fitting a blade guard, grass blade and grass cutter	18
Fitting the blade guard and saw blade	18
Fitting the trimmer guard and trimmer head Trimmy SII	19
Fitting other guards and cutting attachments	19
Adjusting the harness and clearing saw	20
Standard harness	20
Triobalance harness	20
FUEL HANDLING
Fuel safety	22
Fuel	22
Fueling	23
STARTING AND STOPPING
Check before starting	24
Starting and stopping	24
WORKING TECHNIQUES
General working instructions	26
MAINTENANCE
Carburetor	30
Muffler	32
Cooling system	32
Air filter	33
Bevel gear	33
Spark plug	34
Maintenance schedule	35
TECHNICAL DATA
Technical data	36
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS	39

Note the following before starting:

•Please read the operator’s manual carefully.

Maintenance, replacement, or repair of the emission control devices and system may be performed by any nonroad engine repair establishment or individual.

WARNING! Long-term exposure to noise can

!result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may the

!design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.

WARNING! A clearing saw, brushcutter or

!trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

This label certify that the product has been certified in accordance with American exhaust requirements EPA 1.

English – 3