WORKING TECHNIQUES

WARNING! Sometimes branches or grass

!get caught between the guard and cutting attachment. Always stop the engine before cleaning.

Working methods

WARNING! Machines fitted with saw blades

!or grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. This is called blade thrust. A blade thrust can be violent enough to cause the machine and/or operator to be propelled in any direction, and possibly lose control of the machine. Blade thrust can occur without warning if the machine snags, stalls or binds. Blade thrust is more likely to occur in areas where it is difficult to see the material being cut.

Avoid cutting with the area of the blade between the 12 o’clock and 3 o’clock positions. Because of the speed of rotation of the blade, blade thrust can occur if you attempt to cut thick stems with this area of the blade.

•Before you start clearing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollows etc.

•Start at whichever end of the area is easiest, and clear an open space from which to work.

•Work systematically to and fro across the area, clearing a width of around 4-5 m on each pass. This exploits the full reach of the machine in both directions and gives the operator a convenient and varied working area to work in.

•Clear a strip around 75 m long. Move your fuel can as work progresses.

•On sloping ground you should work along the slope. It is much easier to work along a slope than it is to work up and down it.

•You should plan the strip so that you avoid going over ditches or other obstacles on the ground.You should also orient the strip to take advantage of wind conditions, so that cleared stems fall in the cleared area of the stand.

Forestry clearing using a saw blade

•The risk of blade thrust increases with increasing stem size. You should therefore avoid cutting with the area of the blade between 12 o’clock and 3 o’clock.

•To fell to the left, the bottom of the tree should be pushed to the right. Tilt the blade and bring it diagonally down to the right, exerting firm pressure. At the same time push the stem using the blade guard. Cut with the area of the blade between 3 o’clock and 5 o’clock. Apply full throttle before advancing the blade.

•To fell to the right, the bottom of the tree should be pushed to the left. Tilt the blade and bring it diagonally up to the right. Cut with the area of the blade between 3 o’clock and 5 o’clock so that the direction of rotation of the blade pushes the bottom of the tree to the left.

English – 27

Page 26 Page 28
Page 27
Image 27
Husqvarna 250 R manual Forestry clearing using a saw blade, Working methods
Page 26 Page 28

250 R specifications

The Husqvarna 250 R stands as a prominent contender in the realm of off-road motorcycles, particularly for those who seek performance and rideability in rugged terrains. This model encapsulates a combination of advanced engineering and rider-focused design, making it a favorite among both amateur and experienced riders.

One of the standout features of the Husqvarna 250 R is its powerful engine. The bike is powered by a 249cc, single-cylinder, two-stroke engine, optimized for maximum performance across various riding conditions. With its lightweight construction, the engine delivers impressive power without sacrificing maneuverability. Riders can expect robust acceleration and excellent throttle response, which is crucial for navigating challenging trails and obstacles.

The Husqvarna 250 R also incorporates cutting-edge technologies that enhance its performance. One notable feature is the electronic fuel injection system, which ensures optimal fuel delivery and improved efficiency. This technology not only contributes to the overall performance of the engine but also minimizes emissions and enhances fuel economy. The bike’s adjustable power valve allows for customizable power delivery, catering to the rider’s preferences and the riding environment.

Another significant aspect of the Husqvarna 250 R is its lightweight chassis, constructed from high-quality materials. The frame is designed to provide excellent rigidity while keeping the overall weight to a minimum. This balance of strength and lightness contributes to the bike's agility and ease of handling, making it versatile for various riding styles and terrains.

Suspension is another critical feature of the Husqvarna 250 R. The bike is equipped with fully adjustable WP XACT forks at the front and a WP XACT shock at the rear, offering superior damping capabilities. This advanced suspension system provides enhanced stability and comfort, allowing for better control during aggressive maneuvers or when tackling rough terrains.

The ergonomics of the Husqvarna 250 R are tailored to enhance the riding experience. The seat is designed for optimal comfort, providing support during long rides while ensuring that riders can easily shift their weight when necessary. The bike also features wide footpegs that deliver excellent grip and control.

In summary, the Husqvarna 250 R is a remarkable off-road motorcycle that combines performance, advanced technology, and rider-friendly design. Its powerful engine, lightweight chassis, superior suspension system, and ergonomic features make it an ideal choice for adventure enthusiasts looking to conquer the trails with confidence and agility. Whether navigating through tight woods or tackling open trails, the Husqvarna 250 R is engineered to deliver an exhilarating riding experience.
Top Page Image Contents