Fence |
| Fence |
|
A | B | B | A |
| Table on Base |
| Table on Base |
| Fig. 39 |
| Fig. 40 |
(3)Setting to cut crown moldings at positions 1 and 4 in Fig. 35 (see Fig. 41; tilt the head to the right):
1 Turn the turntable to the right and set the Miter Angle as follows:
* For 45° type crown moldings: | 35.3° ( |
| mark) |
* For 38° type crown moldings: | 31.6° ( |
| mark) |
|
2Tilt the head to the right and set the Bevel Angle as follows:
* For 45° type crown moldings: | 30° ( |
| mark) | |
* For 38° type crown moldings: | 33.9° ( |
| mark) | |
| ||||
3Position the crown molding so that the upper surface (B in Fig. 34) contacts the fence as indicated Fig. 43.
(4)Setting to cut crown moldings at positions 2 and 3 in Fig. 35 (see Fig. 42; tilt the head to the right):
1 Turn the turntable to the left and set the Miter Angle as follows:
*For 45° type crown moldings: 35.3° ( mark)
* For 38° type crown moldings: 31.6° ( mark)
2Tilt the head to the right and set the Bevel Angle as follows:
*For 45° type crown moldings: 30° ( mark)
* For 38° type crown moldings: 33.9° ( mark)
3Position the crown molding so that the lower surface (A in Fig. 34) contacts the fence as in Fig. 44.
Head | Bevel Angle | Head |
| |
| Bevel Angle | |||
4 |
| |||
Scale |
| |||
|
| Scale | ||
| 1 | 3 | ||
| 2 | |||
| Fence | |||
| Fence |
| ||
Miter Angle | Base |
| Base | |
|
| |||
Turntable | Turntable | Miter Angle | ||
Scale | ||||
|
| Scale | ||
|
|
| ||
| Fig.41 |
| Fig. 42 | |
Fence |
| Fence |
| |
B | A | A | B | |
| Table on Base | Table on Base | ||
| Fig. 43 |
| Fig. 44 | |
25