English

ASSEMBLY AND OPERATION

APPLICATIONS

Cutting Various types of wood.

REMOVAL AND INSTALLATION METHOD OF BATTERY

Handle

 

How to install the battery.

 

 

 

 

Align the battery with the groove in tool

 

 

handle and install it into place.

 

Push

Always insert it all the way until it locks in

 

place with a little click, If not, it may

Insert

Latch

accidentally fall out of the tool, causing injury

to you or someone around you. (Fig. 5)

 

 

How to remove the battery.

 

Battery

Withdraw battery from the tool handle while

 

pressing the latches on both sides of the

 

Pull out

 

battery. (Fig. 5)

 

Fig. 5

 

 

CHARGING METHOD

NOTE: Before plugging into the receptacle, make sure the following points.

The power source voltage is stated on the nameplate.

The cord is not damaged.

WARNING: Do not charge at voltage higher than indicated on the nameplate.

If charged at voltage higher than indicated on the nameplate, the

charger will burn out. Battery

 

1. Insert the plug of battery charger into

 

the receptacle.

 

When the plug of battery charger has been

Pilot lamp

inserted into the receptacle, pilot lamp will

blink in red. (At 1-second intervals)

 

WARNING: Do not use the electrical

 

cord if damaged. Have it

 

repaired immediately.

14

Fig. 6

 

Page 14
Image 14
Hitachi C 6DC2 Assembly and Operation, Applications, Removal and Installation Method of Battery, Charging Method