AMC550mp OPERATION AND USE

One of the best features of the AMC550mp is that it can be switched between “Direct” and “Diffuse” radiation modes. The surround mode switch is conveniently located under the grille to allow easy access. See Diagram for toggle switch location. Refer to the switch diagram and the figures to determine the appropriate setting. You should take some time and experiment to best adapt the speaker to your listening habits.

The diffuse mode is preferable when the listener should not be able to localize the sound source. This should be perceived as “wall-of-sound”. Music with side channels encoded with hall effects will produce a feeling of envelopment. Surround encoded baseball games will be heard as if the stadium were all around, with no clear source of off-the-field, realism- enhancing effects.

Both music and movies will have instances when either “direct” or “diffuse” surround sound will suit. Music recordings with musicians in the side channels will most likely sound best in “direct” mode. However, if the side channels are used to record the performance environment or audience sounds, the “diffuse” mode may be best.

Similarly, with movie soundtracks, some producers will use side channels to pan discrete sources off screen (e.g., jet fly-bys, etc.). This material will be well-served with the “direct” mode. Other movies will use the side channels to transport you to a remote environment with street noises, crowd noises, etc. These may be best reproduced in “diffuse” mode.

PREPARING FOR INSTALLATION

Preparing for Installation

Map out the wiring paths from the speakers to the amplifier. We recommend 16-gauge wire for runs up to 25 feet, and 14-gauge or thicker for longer runs. Be sure the speaker wire does not rest or rub against any sharp or pointed objects.

The speakers should be mounted on a flat surface to form a good seal between the speaker flange and the mounting surface.

Each speaker is 8 ohms nominal. When connecting more than two speakers per amplifier channel, you should use series/parallel wiring or line transformers. In all cases, make certain that the total impedance does not fall below the amplifier’s minimum rating. If you are not sure, contact your Snell Acoustics dealer.

You Will Need

1.A utility knife, an electric jigsaw, or another means of cutting a hole in the mounting surface.

2.Phillips screwdriver.

3.A wire cutter or stripper for preparing the speaker wires.

4.An awl or a small screwdriver to remove the speaker grille.

With the hardware supplied, the speaker can be installed in existing walls and ceilings from 1⁄2" (12mm) to 11⁄2" (38mm) thick. For thinner walls, you will need to use spacers (not provided) for the mounting bracket. In walls greater than 11⁄2" (38mm) thick, you will need longer screws.

7

Page 6 Page 8
Page 7
Image 7
Snell Acoustics owner manual AMC550mp Operation and USE, Preparing for Installation, You Will Need
Page 6 Page 8

AMC550mp specifications

The Snell Acoustics AMC550mp is a remarkable piece of audio engineering designed to provide an exceptional listening experience. With its unique blend of advanced technologies and thoughtful design, this speaker delivers audio fidelity that caters to both casual listeners and audiophiles alike.

One of the standout features of the AMC550mp is its proprietary driver technology. Snell Acoustics has developed a series of advanced woofer and tweeter designs that work in tandem to produce a wide frequency range and powerful performance. The woofers are designed with high excursion capacities, allowing for deep, resonant bass that doesn’t get lost even at higher volumes. The tweeters, on the other hand, are engineered to reproduce crisp and clear high frequencies, ensuring that every note and detail in a recording comes through accurately.

Another significant aspect of the AMC550mp is its cabinet construction. The speaker cabinets are crafted from high-quality materials that not only enhance durability but also minimize unwanted resonance. The internal bracing design is meticulously engineered to reduce vibration and distortion, resulting in cleaner sound output. The finish of the cabinets is not just aesthetically pleasing but also contributes to the overall acoustic performance, making them a perfect fit for any modern living space.

The AMC550mp also features advanced crossover technology, which aids in the seamless integration of the woofer and tweeter. This technology ensures that frequencies are directed appropriately to the appropriate driver, allowing for a balanced soundstage that enhances the overall listening experience. Snell Acoustics pays attention to the phase and timing of sound waves, ensuring that listeners experience music as the artists intended.

Connectivity options on the AMC550mp cater to contemporary audio setups. With a range of inputs available, including traditional speaker wire connections and advanced binding posts, this speaker is versatile and easy to integrate into any sound system. Its compatibility with various audio formats and systems makes it a great choice for both stereo and home theater applications.

In summary, the Snell Acoustics AMC550mp stands out for its impressive driver technology, robust cabinet construction, and advanced crossover design. It delivers clear, dynamic sound across the frequency spectrum and is ideal for listeners who prioritize high-quality audio. Whether for music or movies, the AMC550mp offers an unparalleled acoustic experience, making it a worthy consideration for any audio enthusiast.
Top Page Image Contents