English

OPTIONAL ACCESSORIES...sold separately

qExtension Holder and Stopper (Fig. 1) (Code No. 998866)

wGuard Assembly (A) (Adjustable) (Code No. 998984)

eSaw blade 8-1/2" (216mm) TCT Saw blade (Total teeth: 36) (Code No. 998860)

rSaw blade 8-1/2" (216mm) TCT Saw blade (Total teeth:60) (Code No.998862)

tSaw blade 8-1/2" (216mm) TCT Saw Blade for aluminum (Total teeth: 60) (Code No.998864)

NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.

APPLICATIONS

Wood and aluminum sash.

PREPARATION BEFORE OPERATION

Make the following preparations before operating the power tool:

1. Installation

5-29/32" (150mm)

 

Base

5/16" (8mm) Bolt

 

 

 

(264mm)

 

 

13/32"-10

 

 

11/32" (9mm) 3 Holes

11-13/16" (300mm)

1" (25mm) thick bench

Work Bench 5/16" (8mm) Nut

Fig. 4

Attach the power tool to a level, horizontal work bench in accordance with Fig. 4.

Select 5/16" (8mm) diameter bolts suitable in length for the thickness of the work bench. Bolt length should be at least 1" (25mm) plus the thickness of the work bench.

For example, use 2" (50mm) or larger bolts for a 1" (25mm) thick work bench. The holder attached to the rear of the base helps stabilize the power tool.

Base holder adjustment:

Loosen the 6mm bolt with the supplied 10mm box wrench. Adjust the base holder until its bottom surface contacts the work bench surface.

After adjustment, firmly tighten the 6mm bolt.

Base Holder

Adjust the base holder until its bottom surface contacts the work bench surface.

6mm Bolt

Move

Fig. 5

10