English

6. Installing the holders ... (Optional accessory)

6mm Knob Bolt (Optional Accessory)

Holder

The holders help keep longer workpieces stable and in place during the cutting operation.

(1)As indicated in Fig. 12, use a steel square for aligning the upper edge of the holders with the base surface.

(2)After aligning, secure the holders with the 6mm knob bolts (Op- tional accessory).

Steel Square

Base Surface

 

Fig. 12

7. Stopper for precision cutting ... (Stopper is optional accessory)

Workpiece

Stopper Holder

The stopper facilitates continuous precision cutting in lengths of 10-7/16" to 16-15/16" (265mm to 430mm).

To install the stopper, attach it to the holder with the 6mm knob bolt as shown in Fig. 13.

Move

6mm Knob Bolt

Fig. 13

8. Using an ink line

Press down the handle to lift the safety cover as shown in Fig. 14, and align the premarked ink line with the saw blade.

Handle

Safety Cover

Fence (B)

Marking

 

(pre-marked)

Fig. 14

CAUTION: Never lift the safety cover while the saw blade is rotating.

PRACTICAL APPLICATIONS

WARNING: * To avoid personal injury, never remove or place a workpiece on the table while the tool is being operated.

*Never place your limbs inside of the line next to warning sign while the tool is being operated. This may cause hazardous conditions (see Fig. 15).

Line

Warning Sign

Warning Sign

Line

 

Fig. 15

14