English
CONNECTING WITH CLEANER
By connecting with cleaner (sold separately) through dust collector and adopter (sold separately), most of dust can be collected.
(1)Remove the allen wrench from the base.
(2)Move the base fully forward. (Fig. 11, 12)
(3)Attach the chip cover with the shutter put between the chip cover and gear cover. (Fig. 19)
(4)Connect the dust collector with adopter. (Fig. 20)
(5)Connect the adapter with the nose of cleaner. (Fig. 20)
(6)Insert dust collector into the rear hole of the base until the hook catches in the notch. (Fig. 21)
(7)Press the hook to remove the dust collector.
| Shutter |
| Chip cover |
| Fig. 19 |
| Adapter |
Chip | Nose |
cover | Cleaner |
|
Base
Dust collector
Fig. 20
Notch
Hook
Nose
Base
Rear
hole Dust
collector Adapter Fig. 21
16
