Hitachi CP-X2510N, CP-X3010N COMPONENT DY, ECb/Pb FCr/Pr

BAT TERY

LAN

GS-VIDEO

Mini DIN 4pin jack

Pin Signal

1Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator

Color signal 0.300Vp-p (PAL/SECAM, burst) 75Ω terminator

2 Brightness signal, 1.0Vp-p, 75Ω terminator

3Ground

4 Ground

Connection to the ports (continued)

HVIDEO

RCA jack

• System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60

• 1.0±0.1Vp-p, 75Ω terminator

COMPONENT DY, ECb/Pb FCr/Pr

RCA jack x3

• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60

Port Signal

YComponent video Y, 1.0±0.1Vp-p with composite sync, 75Ω terminator

Cb/Pb Component video Cb/Pb, 0.7±0.1Vp-p, 75Ω terminator

Cr/Pr Component video Cr/Pr, 0.7±0.1Vp-p, 75Ω terminator

Downloaded from www.Manualslib.com manuals search engine

Contents

Main Projector CP-X2010N/CP-X2510N/CP-X3010N User's Manual (detailed) Operating Guide Technical Example of computer signal Initial set signals Connection to the ports COMPONENT DY, ECb/Pb FCr/Pr Page USB CONTROL LAN To input SCART RGB signal; ex. To input component video signal to COMPUTER IN ports ex. RS-232C Communication 1. 2. 3. 4. Communicaion settings 1. Protocol 2. Command format 3. Response code / Error code Command Control via the Network 1. 2. 3. Communicaion Port When the authentication setting is enabled, the following settings are required. Command control settings [TCP #23] 1. Command format 2. Response code / Error code ("h" shows hexadecimal) [TCP #9715] 1. Command format 2. Response code / Error code Automatic Connection Break Authentication 1. 2. 3. 4. Network Bridge Communication Communication settings RS-232C Communication / Network command table RS-232C Communication / Network command table Page Page * ACTIVE IRIS is available only for CP-X2510N and CP-X3010N. Page Page RS-232C Communication / Network command table (continued) * Not all of the languages in the table are supported. Page * ACTIVE IRIS is available only for CP-X2510N and CP-X3010N. Page PJLink command