Manuals / Hitachi / Kitchen Appliance / Range

Hitachi CR 13VA Precautions In Sales Promotion, Standard Repair Time Unit Schedules, Contents

Models: CR 13VA

1 37

Download 37 pages 47.23 Kb

Page 2

Notice for use

Specifications and parts are subject to change for improvement.

Refer to Hitachi Power Tool Technical News for further information.

CONTENTS

	Page
1. PRODUCT NAME	1
2. MARKETING OBJECTIVE	1
3. APPLICATIONS	1
4. SELLING POINTS	1
4-1. Selling Point Descriptions	2
4-2. Descriptions of patent pending	5
5. SPECIFICATIONS	6
5-1. Specifications	6
5-2. Optional Accessories	7
6. COMPARISONS WITH SIMILAR PRODUCTS	9
6-1. For USA Market	9
6-2. For European Market	9
7. COMPARISONS IN CUTTING TIME	10
7-1. Cutting Steel Pipes	10
7-2. Cutting Wood	11
7-3. Cutting Wood with Saw Blade Installed Upside Down	12
7-4. Cutting Operation for Long Blade Life	13
8. PRECAUTIONS IN SALES PROMOTION	14
8-1. Handling Instructions	14
8-2. Caution on Name Plate	14
9. REPAIR GUIDE	15
9-1. PRECAUTIONS IN DISASSEMBLY AND REASSEMBLY	15
9-2. Lubrication	24
9-3. Tightening Torques	24
9-4. Wiring Diagram	24
10. CONFIRMATION AFTER REASSEMBLY	26
10-1. Lead Wire Precautions	26
10-2. Insulation Tests	26
10-3.No-Load Current Value	26
11. STANDARD REPAIR TIME (UNIT) SCHEDULES	27
Assembly Diagram for CR 13VA	28
Assembly Diagram for CR 13VA [For the U.S.A. and Canada only]	32

Image 2

Hitachi CR 13VA service manual Precautions In Sales Promotion, Standard Repair Time Unit Schedules, Contents

Contents

RECIPROCATING SAW POWER TOOLSCR 13VA CR 13VA11. STANDARD REPAIR TIME UNIT SCHEDULES 8. PRECAUTIONS IN SALES PROMOTIONCONTENTS 3. APPLICATIONS 1. PRODUCT NAME2. MARKETING OBJECTIVE 4. SELLING POINTS4-1.Selling Point Descriptions 4 New swing cutting action patent pending Movement when the saw blade is mounted normallyPlunge cutting on plywood panels New swing cutting mechanism1Dust-resistantfelt ring with backup ring 4-2.Descriptions of patent pending 5. SPECIFICATIONS 5-1.Specifications5-2.Optional Accessories 2 BI-METALblades 6-2.For European Market 6. COMPARISONS WITH SIMILAR PRODUCTS6-1.For USA Market CR 13VA CR A B C D E FA B C D E F CR 13VAHITACHI genuine blade No. 121 for cutting wood CR 13VAA B C D E F 7-4.Cutting Operation for Long Blade Life 8-1.Handling Instructions 8. PRECAUTIONS IN SALES PROMOTIONRead thoroughly HANDLING INSTRUCTIONS before use 8-2.Caution on Name Plate9-1.PRECAUTIONS IN DISASSEMBLY AND REASSEMBLY 9. REPAIR GUIDELoosen the Nylock Bolt W/Flange M6 x 35 47 which secures the fan of the armature assy approximately two turns. Remove the four Machine Screws W/Washers M5 x 60 42 and then pull out the Gear Cover 3Disassembly of the blade mounting section Fig 5Disassembly of the Second Shaft A 64 section Fig. 8Disassembly of Handles A 74 and B 80 section Fig Fig. 13-a Fig. 13-bNotch Notch Arrow mark Hole Arrow mark Fig.Plunger sleeve Plunger A Be careful not to damage Washer F 3. Fig 9-3.Tightening Torques 9-4.Wiring Diagram9-2.Lubrication For cord For cord 10-2.Insulation Tests 10. CONFIRMATION AFTER REASSEMBLY10-1.Lead Wire Precautions 10-3. No-LoadCurrent Value11. STANDARD REPAIR TIME UNIT SCHEDULES Model CR 13VA ELECTRIC TOOL PARTS LISTSABER SAW 1999CODE NO PARTSCR 13VA DESCRIPTION318-488 PARTS STANDARD ACCESSORIESOPTIONAL ACCESSORIES SABER SAW Model CR 13VA For the U.S.A. and Canada only E1ELECTRIC TOOL PARTS LIST 2000ALTERNATIVE PARTS PARTSTAPPING SCREW W/FLANGE D4X25 BLACK PARTS 318-488STANDARD ACCESSORIES