|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(1) Nippeco |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lip portion of the |
|
|
|
|
|
|
|
| Inner circumference of the Swing Roller [53] |
| |||||||||
Sphere portion of the Recipro Plate [61] |
|
|
|
| Both sides of the Thrust Bearing [21] |
| |||||||||||||
Inner circumferene of the Guide Sleeve Ass'y[9] and Metal (A) [8] |
|
|
| ||||||||||||||||
Apply 45 g of Nippeco |
|
|
|
|
|
|
|
| |||||||||||
(2) Doubrex 251 grease |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel Ball D4.76 [15] |
|
|
|
|
|
|
|
| Inner circumference of Holder Sleeve (B) [14] |
| |||||||||
Cam groove portion of Plunger (A) Set [32] |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• • • • • • • • • • | • • | • • • • • | • | • • • • • • • • • • • • • • • • • • • • • • • • |
|
| 1.2 | 0.3 N•m (12 | 3 kgf•cm, 10.4 | 2.6 | |||||||||
Seal Lock Screw (W/Washers) M4 x 10 [44] • • • • • • • | • • • • • • • • • • • • • • • • • | 1.8 | 0.4 N•m (18 | 4 kgf•cm, 15.6 | 3.5 | ||||||||||||||
Machine Screw M4 x 10 [59] • • • • | • • • • • • • • • • | • • | • • • • • | • • • | • • • • • • • • • • • • • | • • • | • • • • • | • |
|
| 1.8 | 0.4 N•m (18 | 4 kgf•cm, 15.6 | 3.5 | |||||
Flat Hd. Screw M4 x 8 [69] • • • • • • | • | • • • • • • • • • • | • • • • • • • | • • | • | • • • • • • • • • • • • • | • • • | • • • • • | • |
|
|
| 1.8 | 0.4 N•m (18 | 4 kgf•cm, 15.6 | 3.5 | |||
Tapping Screw D4 x 8 [23] • • • • • • | • • • • • • • • • • • • • • | • • • • • | • | • • • • • • • • • | • • • • • • • • • | • • • • • |
|
|
|
| 1.8 | 0.4 N•m (18 | 4 kgf•cm, 15.6 | 3.5 | |||||
Tapping Screw (W/Flange) D4 x 25 [43] • • • • • | • | • • • • • • • • | • • • • • | • • • • • • • • • | • | • | • | 2.0 | 0.5 N•m (20 | 5 kgf•cm, 17.4 | 4.3 | ||||||||
Tapping Screw (W/Flange) D4 x 16 [77] • • • • • | • | • • • • • • • • | • • • • • | • • • • • • • • • | • | • |
| 2.0 | 0.5 N•m (20 | 5 kgf•cm, 17.4 | 4.3 | ||||||||
Machine Screw (W/Washers) D5 x 60 [42] • | • • • • • • • • • | • • • • • • • • • | • • • • • |
| • | • | • | 2.5 | 0.5 N•m (25 | 5 kgf•cm, 21.7 | 4.3 | ||||||||
Hex. Hd. Tapping Screw D 5 x 55 [72] • • • • • • • • | • | • • • • • • • • • • • • • | • • • | • • • • • • | • |
|
| 3.4 | 0.7 N•m (35 | 7 kgf•cm, 30.4 | 6.1 | ||||||||
Nylock Bolt (W/Flange) M6 x 35 [47] • • • • | • | • • • • | • | • • • • • • • • • | • • • • • • • • • |
|
|
| 9.8 | 2.0 N•m (100 | 20 kgf•cm, 86.8 | 17.4 | |||||||
Bolt M10 [49] • • • • • • • • • • • • • • • • • • • • • • • • • • • • • | • • • • • • • • • • | • • | • | • • • • | • • • | • • • • • • • | • • • • • • |
| 12.3 | 2.5 N•m (125 25 kgf•cm, 108.5 | 21.7 |
9-4. Wiring Diagram
Carefully ensure that wiring is accomplished as illustrated below. As incorrect wiring will result in lack of rotation, reverse rotation or other malfunctions, close attention is absolutely necessary. Also, be careful of the presence or
absence of Tube (D) [79] for working.
Switch body
Noise suppressor
Noise suppressor earth wire
Triac ass'y
Dial resistor
Fig. 23