English

OPERATION

How to make the batteries perform longer.

○Recharge the batteries before they become completely exhausted.

When you feel that the power of the tool becomes weaker, stop using the tool and recharge its battery. If you continue to use the tool and exhaust the electric current, the battery may be damaged and its life will become shorter.

1.Installing the bit

Always follow the following procedure to install driver bit. (Fig. 5)

Driver bitMovement

Hexagonal hole in

Guide

the socket

sleeve

 

Fig. 5

(1)Pull the guide sleeve forward.

(2)Insert the bit into the hexagonal hole in the socket.

(3)Release the guide sleeve and it returns to its original position.

Shift knob

Low speed

Fig. 6

Shift knob

High speed

Fig. 7

CAUTION

●When changing the rotational speed with the shift knob, confirm that the switch is off.

Changing the speed while the motor is rotating will damage the gears.

●When a large force is required for operation, set the shift knob to “LOW”. If “HIGH” is set and the unit is used, it may cause the motor to burn out or malfunction prematurely.

6. Confirm the clutch dial position (see Fig. 8).

CAUTION

If the guide sleeve does not return to its original position, then the bit is not installed properly.

Weak

Clutch dial Triangle mark

2.Removing the bit

Please do the opposite point on the method of installing bit.

3.Automatic spindle-lock mechanism

When the main switch is off, the bit is locked in place, and the tool can be used as a manual screwdriver.

4.Confirm that the battery is mounted correctly

5.Change rotation speed

Operate the shift knob to change the rotational speed. Move the shift knob in the direction of the arrow. (See Fig. 6 and 7)

When the shift knob is set to “LOW”, the drill rotates at a low speed. When set to “HIGH”, the drill rotates at a high speed.

14

Strong

Drill mark

 

Fig. 8

The tightening torque of this unit can be adjusted according to the clutch dial position, at which the clutch dial is set.

(1)When using this unit as a screwdriver, line up the one of the numbers “1, 5, 9 ... 21” on the clutch dial, or the black dot, with the triangle mark on the outer body.

(2)When using this unit as a drill, line up the clutch

dial drill mark “” with the triangle mark on the outer body.