English
9.Using the light
The light lights when the light switch is pushed. When the light switch is pushed again, the light is turned off. (Fig. 12)
Light switch
Fig. 12
CAUTION
Do not look directly into the light. Such actions could result in eye injury.
10.Using in the straight or pistol configuration
Use the tool in the straight configuration when using in confined spaces. Use it in the pistol configuration when using in other locations. Select the configuration that best matches the tool application. When changing the configuration, the tool will make a clicking sound when it snaps into position. Bend (or extend) the tool until the clicking sound is heard.
CAUTION
When using the tool in the pistol configuration, do not hold onto the bending portion of the tool when returning to the straight configuration. Your finger or other part of the hand may be pinched by the bending portion resulting in possible injury (Fig. 13).
Bending portion
Fig. 13
THE SCOPE AND SUGGESTIONS
FOR USES
|
|
| Table 6 | ||
| Work | Cap position | Suggestions | ||
Drilling |
| Steel |
| Use for drilling purpose. | |
| Aluminum |
| |||
|
|
|
| ||
|
| Small screw | 1 – 21 | Use the bit and socket matching the screw | |
Screw tightening | diameter. | ||||
|
| ||||
Wood screw | 1 – | Use after drilling a pilot hole. | |||
|
| ||||
|
|
|
|
| |
CAUTION
●While operating the cordless driver drill, take care not to lock the motor.
If the motor is locked, immediately turn the power off.
If the motor is locked for a while, the motor or battery will be burnt.
●Do not tighten too strongly as the screw heads will be damaged.
16