English

PRECAUTIONS ON USING ROTARY HAMMER

1.Wear ear protections

Exposure to noise can cause hearing loss.

2.Do not touch the bit during or immediately after operation. The bit becomes very hot during operation and could cause serious burns.

3.Before starting to break, chip or drill into a wall, floor or ceiling, thoroughly confirm that such items as electric cables or conduits are not buried inside.

4.Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.

5.Always hold the body handle and side handle of the power tool firmly. Otherwise the counterforce produced may result in inaccurate and even dangerous operation.

6.Wear a dust mask

Do not inhale the harmful dusts generated in drilling or chiseling operation. The dust can endanger the health of yourself and bystanders.

SPECIFICATIONS

Voltage

230V

Power Input

800 W

No-load speed

0 – 1050 min–1

Full-load impact rate

0 – 4600 min–1

Capacity: concrete

3.4 – 24 mm

steel

13 mm

wood

32 mm

Weight (without cord and side handle)

2.8 kg

Dust collecting adapter

 

Max. hole-drilling depth:

100 mm (adjustment possible between 0 and 100 mm)

Diameter of drill:

3.4 – 24 mm

Max. length of drill (overall length):

270 mm

Dustbag capacity:

0.4 liters

STANDARD ACCESSORIES

(1)

Case (Molded plastic) .................................................

1

[Numbers (3) and (4) refer to use on concrete]

 

(2)

Side handle .................................................................

1

(5) Cap ...............................................................................

1

(3)

Dust collecting adapter ..............................................

1

Standard accessories are subject to change without

(4)

Dust bag ......................................................................

1

notice.

 

OPTIONAL ACCESSORIES (sold separately)

1.Drilling anchor holes (rotation + hammering)

￿ Drill bit (Slender shaft)

Drill bit (Slender shaft)

Adapter for slender shaft

 

 

(SDS-plus shank)

 

 

 

 

Drill bit (slender shaft)

 

Outer diameter

 

Effective length

 

Overall length

 

 

 

 

 

3.4 mm

 

45 mm

 

90 mm

3.5 mm

 

 

 

 

 

 

 

 

 

 

 

￿Drill bit (Taper shank) and taper shank adapter

Drill bit (Taper shank)

Taper shank adapter

 

(SDS-plus shank)

 

Cotter

7