Manuals / Hitachi / Power Tools / Power Hammer

Hitachi DH30PB, DH30PC HOW to USE, Selecting the driver bit, Selecting the function mode

Models: DH30PC DH30PB

1 76
Download 76 pages 56.33 Kb
Page 12
Image 12

English

(When using dust collector (B) attached to a drill bit that has more than 7-15/ 32" (190 mm) of overall length, dust collector (B) cannot touch the concrete surface but rotates. Therefore please use dust collector (B) by attaching to drill bits which have 6-17/32" (166 mm), 6-19/64" (160 mm) and 4-21/64" (110 mm) overall length.

◯Dump particles after every two or three holes when drilling.

◯Please replace the drill bit after removing dust collector (B).

8.Selecting the driver bit

Screw heads or bits will be damaged should an inappropriate bit for the screw diameter be employed to drive in the screws.

9.Selecting the function mode

You can switch functions to the 3 modes of “strike only, “rotation + strike”, and “rotation only” by turning the change lever while pressing the push button. Set the mark position of the change lever to that of the mode to be used.

CAUTION:

◯Before operating the change lever, check and make sure that the motor has stopped.

A failure can occur if it is operated while the motor is running.

◯If the change lever does not move up to the mark position of each mode, carry out switching while turning the grip end to left and right. Also, it can become difficult to change the mode at low temperature, and therefore perform warming-up.

◯To operate the change lever, press the push button, and release the lock of the change lever. Also, check and make sure after operation that the push button has returned and that the change lever has been locked.

◯Switch the change lever without mistake. If it is used at a position halfway, there is a fear that the service life of the switching mechanism may be shortened.

◯Note that it is impossible to switch from “rotation only” to “strike only” or from “strike only” to “rotation only”. Switch over via “rotation + strike”. (DH30PC)

HOW TO USE

CAUTION:

◯To prevent accidents, make sure to turn the switch off and disconnect the plug from the receptacle when the drill pits and other various parts are installed or removed. The power switch should also be turned off during a work break and after work.

12

Page 11 Page 13
Page 12
Image 12
Hitachi DH30PB, DH30PC instruction manual HOW to USE, Selecting the driver bit, Selecting the function mode
Page 11 Page 13

DH30PC, DH30PB specifications

The Hitachi DH30PB and DH30PC are powerful tools designed to meet the rigorous demands of construction and renovation professionals. Both models are renowned for their performance, ergonomics, and advanced technology, making them ideal choices for a variety of drilling and chiseling applications.

One of the standout features of the DH30PB and DH30PC is their robust motor. Equipped with a high-performance 3.2-amp motor, these tools deliver exceptional drilling power, providing users with the capability to handle tough materials, including concrete, masonry, and more. This powerful motor ensures quick and efficient drilling, saving both time and energy on the job site.

The Hitachi DH30PB and DH30PC also incorporate advanced vibration-reduction technology. This feature minimizes the vibrations transferred to the user's hands during operation, significantly enhancing comfort and reducing fatigue. As a result, professionals can work for extended periods without discomfort, increasing productivity and job satisfaction.

Another impressive aspect of these models is their hammering mechanism. With a high-impact energy rating, the DH30PB and DH30PC offer fast and effective chiseling and hammer drilling capabilities. This versatility makes them suitable for a wide range of applications, from drilling holes for anchors to chiseling through tough surfaces.

In terms of design, both models are built for durability and ease of use. They feature a lightweight construction, making them easy to maneuver in tight spaces while maintaining strength and performance. The rubberized grip enhances comfort and control, ensuring a secure hold during operation.

Moreover, the DH30PB and DH30PC come equipped with a quick-change chuck, allowing for seamless bit changes without requiring additional tools. This feature increases efficiency and convenience on the job site, enabling professionals to switch between tasks effortlessly.

In conclusion, the Hitachi DH30PB and DH30PC models stand out in the crowded market of power tools due to their powerful motors, advanced vibration-reduction technology, and user-friendly design. These features, combined with their exceptional performance in challenging environments, make them reliable companions for professionals in construction, renovation, and various industrial applications. Whether drilling or chiseling, users can count on these tools to deliver results that meet and exceed expectations.