English

3. Confirm that the battery is mounted correctly.

 

5. Change rotation speed.

4. Check the rotational direction.

 

 

 

The bit rotates clockwise (viewed from the rear

 

side) by pushing the R-side of the selector button.

 

The L-side of the selector button is pushed to turn

 

the

bit counterclockwise

(See Fig.

8).

 

(The

L and R marks are provided on the body.)

High speed

 

 

 

 

Trigger

Selector

 

Shift knob

switch

button

 

Fig. 9

R marks

L marks

Fig. 8

When the trigger switch is depressed, the tool rotates. When the trigger is released, the tool stops.

The rotational speed of the drill can be controlled by varying the amount that the trigger switch is pulled. Speed is low when the trigger switch is pulled slightly and increases as the trigger switch is pulled more.

When releasing the trigger of the switch, the brake will be applied for immediate stopping.

Lowspeed

Shift knob

Fig. 10

Operate the shift knob to change the rotational speed. Move the shift knob in the direction of the arrow (See Figs. 9 and 10).

When the shift knob is set to “LOW”, the drill rotates at a low speed. When set to “HIGH”, the drill rotates at a high speed.

CAUTION:

●When changing the rotational speed with the shift knob, confirm that the switch is off.

Changing the speed while the motor is rotating will damage the gears.

●When a large force is required for operation (operations indicated in the following chart) set the shift knob to “LOW”. If “HIGH” is set and the unit is used, it may cause the motor to burn out or malfunction prematurely.

Table 4

Model

DS14DVC

DS18DVC

 

 

 

Metal Drilling

When the diameter of the hole

When the diameter of the hole

exceeds 1/4 in. (6.5 mm).

exceeds 5/16 in. (8 mm).

 

 

 

 

Wood Drilling

When the diameter of the hole

When the diameter of the hole

exceeds 15/32 in. (12 mm).

exceeds 15/16 in. (24 mm).

 

 

 

 

Wood Screw

When the size of the wood

When the size of the wood

screw exceeds 5/32 in. (3.8 mm)

screw exceeds 3/16 in. (4.8 mm)

Tightening

diameter ⋅ 1-31/32 in. (50 mm).

diameter ⋅ 1-9/16 in. (40 mm).

 

 

 

 

15