Hitachi DS 12DVF3, DS 14DVF3, DS 18DVF3 ASSEMBLY AND OPERATION

English

ASSEMBLY AND OPERATION

APPLICATIONS

Use as a drill

Drilling of soft steel, wood, plastic and aluminum materials.

Use as a screwdriver

Tightening and loosening of machine screws, wood screws and tapping screws.

REMOVAL AND INSTALLATION METHOD OF BATTERY

How to install the battery.

Align the battery with the groove in tool handle and slip it into place.

Always insert it all the way until it locks in place with a little click, If not, it may accidentally fall out of the tool, causing injury to you or someone around you (Fig. 3).

How to remove the battery.

Withdraw battery from the tool handle while pressing the latch (1 pc. or 2 pcs) of the battery (Fig. 3).

<DS12DVF3>		<DS14DVF3 and DS18DVF3>
Handle		Handle
	Latch	Latch
Insert		Latch
Insert		Insert
	Push	Insert
	Push
Pull out		Pull out
Pull out		Push
		Push
	Battery	Battery
		Battery
		Fig. 3

CHARGING METHOD

NOTE: Before plugging into the receptacle, make sure the following points.

The power source voltage is stated on the nameplate.

The cord is not damaged.

WARNING: Do not charge at voltage higher than indicated on the nameplate.

If charged at voltage higher than indicated on the nameplate, the charger will burn up.