English
Removing the bit
Securely hold the main unit and pull out the bit by holding the tip with your thumb (Fig. 9).
CAUTION:
●Only Hitachi STANDARD ACCESSORIES phillips bit (No. 2 ⋅ 65L; Code No. 983006) may be used. Do not use other bits since they may come loose.
1.2 Using as an auxiliary light (Light equipped hook)
(1) Press the switch to turn off the light.
If forgotten, the light will turn off automatically after 15 minutes (Fig. 10).
(2)The direction of the light can be adjusted within the range of hook positions 1 - 5 (Fig. 5). Lighting time
AAAAmanganese batteries: approx. 15
hrs.
AAAA alkali batteries: approx. 30 hrs. | Hook |
Fig. 9
Switch
Hook Fig. 10
CAUTION:
●Do not look directly into the light. Such actions could result in eye injury.
1.3Replacing the batteries (Light equipped hook)
(1) Loosen the hook screw with a
Remove the hook cover by pushing in the direction of the arrow (Fig. 12).
(2) Remove the old batteries and insert the new batteries. Align with the hook indications and position the plus (+) and minus
(3) Align the indentation in the hook main body with the protuberance of the hook cover, press the hook cover in the direction opposite to that of the arrow shown in Fig. 12 and then tighten the screw.
Use commercially available AAAA batteries (1.5 V).
NOTE:
Do not tighten the screw excessively. Such action could strip the screw threads.
Screw | |
screwdriver | |
| Fig. 11 |
| Arrow |
| Hook cover |
| Fig. 12 |
| Hook main body |
Inden- |
|
tation | Protube- |
| |
| rance |
AAAA |
|
batteries | Protube- |
| rance |
| Hook cover |
| Indentation |
| Fig. 13 |
18