12
Hookup and Settings

Rear Panel

AERIAL
Connect the aerial to this terminal.
HDMI Connector (Type A)
HDMI output providing a high quality interface for
digital audio and video (page 14).
AV (VIDEO) OUT
Connect to a TV with video inputs.
AV 1 (VIDEO) IN
Connect the video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
AV 1 (AUDIO) IN (Left/Right)
Connect the audio output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
AV (AUDIO) OUT (Left/Right)
Connect to a TV with audio inputs.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
Cooling fan
AC Power Cord
Plug into the power source.
RF. OUT
Passes the signal from the AERIAL to your TV/
monitor
S-VIDEO OUT
Connect to a S-Video Input on TV.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.

Connecting to the Aerial

Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the aerial
input socket on your TV set.

RF coaxial connection

Connect the RF. OUT jack on the recorder to the aerial
input jack on the TV using the 75-ohm Coaxial Cable
supplied (R). The RF. OUT jack passes the signal
through from the AERIAL jack.
Aerial Rear of TV
Rear of the recorder
01EN01DVDS253A(AU).book Page 12 Wednesday, June 7, 2006 3:39 PM