1

2

3

Press the SETUP button when in stop mode.

Use the UP/DOWN button to select Audio Options. Then press the ENTER button.

Use the UP/DOWN button to select the desired item. Then press the LEFT/RIGHT button.

(1) DIGITAL OUTPUT

PCM : Converts to PCM(2CH) 48kHz/16bit audio. Select PCM when using 3D sound.

BITSTREAM : Converts to Dolby Digital BITSTREAM (5.1CH). Select BITSTREAM when using the Dolby Digital Audio Output.

NOTE : Be sure to select the correct Digital Output.

(2) DTS

ON : Outputs DTS BITSTREAM via digital output only. Select DTS when connecting to a DTS DECODER.

OFF : Doesn't output DTS signal.

(3) DYNAMIC COMPRESSION

ON : To select dynamic compression. OFF : To select the standard range.

(4) 2X SCAN AUDIO

ON : Turns 2X audio on.

OFF : Turns 2X audio off.

Though 2X SCAN AUDIO is ON in the Setup Menu, no sound will be heard on discs which are recorded with LPCM, DTS or MPEG-Audio.

NOTE

-If the selected language is not recorded on the disc, the original pre-recorded language is selected.

-How to make the Current Menu disappear and return to Setup Menu during Setup; disappear or return to menu screen during set up

Press RETURN button.

Setting Up the Display Options

1

2

Press the SETUP button in stop mode.

Use the UP/DOWN button to select Display Options. Then press the ENTER button.

31