Hitachi DV14DMR, DV18DMR instruction manual Specifications, Cordless Hammer Drill

English

<UC24YJ for DV18DMR>

	Charge Time Lamp		Battery
			Installation Hole
	Charge
	Status Lamp
	Caution Plate
		Nameplate
			Fig. 3
SPECIFICATIONS
1. Cordless Hammer Drill
Model			DV14DMR	DV18DMR
Motor			DC motor
No-load speed		Low	0–400/min	0–400/min
		High	0–1,750/min	0–1,800/min
Capacity	Drilling	Brick (Depth	9/16"(14 mm)	5/8"(16 mm)
		1-1/4" (30 mm))	(Soft Brick)	(Soft Brick)
		Wood (Thickness	1-25/32" (45 mm)	2" (50 mm)
		11/16" (18 mm))	(Soft Wood)	(Soft Wood)
		Metal (Thickness	1/2" (13 mm)	1/2" (13 mm)
		1/16" (1.6 mm))	(Mild Steel or	(Mild Steel or
			Aluminum)	Aluminum)
	Screw	Wood screw	#20 ⋅ 3"	#20 ⋅ 4"
	Driver		(8 mm ⋅ 75 mm)	(8 mm ⋅ 100 mm)
		Small screw	1/4" (6 mm)	1/4" (6 mm)
Drill chuck capacity			Maximum gripping diameter 1/2" (13 mm)
Battery	Model		EB14B	EB1830HL
	Type		Nickel cadmium battery	Nickel-Metal Hydride battery
	Voltage		DC 14.4 V	DC 18 V
	Charging & discharging		about 1,000
	frequency
Weight			5.5 lbs. (2.5 kg)	5.9 lbs. (2.7 kg)
2. Battery Charger
Model		UC14YFA		UC24YJ
Input power source			Single phase: AC 120 V 60 Hz
Charging time		Approx. 50 min.		Approx. 28min
			(At a temperature of 68°F (20°C))
Charging voltage		DC 7.2–14.4 V		DC 7.2–24 V
Charging current		DC 2.6 A		DC 7.5 A
Weight		1.3 lbs. (0.6 kg)		2.2 lbs. (1.0 kg)

NOTE: The charging time may vary according to temperature and power source voltage.

13