![](/images/backgrounds/283412/bge.png)
English
14
ASSEMBLY AND OPERATION
APPLICATIONS
䡬Use as a hammer drill
Drilling of soft bricks and concrete blocks.
䡬Use as a drill
Drilling of soft steel, wood, plastic and aluminum materials.
䡬Use as a screwdriver
Tightening and loosening of machine screws, wood screws and tapping screws.
REMOVAL AND INSTALLATION METHOD OF BATTERY
䡬How to install the battery
Align the battery with the groove in tool handle and slip it into place.
Always insert it all the way until it locks in place with a little click. If not, it may accidentally
fall out of the tool, causing injury to you or someone around you. (Fig. 4)
䡬How to remove the battery
Withdraw battery from the tool handle while pressing the latch (2 pcs.) on the sides of
the battery. (Fig. 4)
Fig. 4
CHARGING METHOD
NOTE: Before plugging into the receptacle, make sure the following points.
䡬The power source voltage is stated on the nameplate.
䡬The cord is not damaged.
WARNING: Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
Latch
Push
Handle
Battery
Insert
Pull out
Switch Trigger