Hitachi CP-A100W Never use the projector if a problem should occur, Never disassemble and modify

Safety Precautions

WARNING

Never use the projector if a problem should occur.

Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock.

In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer. Never attempt to make repairs yourself because this could be dangerous.

• The power outlet should be close to the projector and easily accessible.

Use special caution for children and pets.

Incorrect handling could result in fire, electrical shock, injury, burn or vision problem.

Use special caution in households where children and pets are present.

Do not insert liquids or foreign object.

Penetration of liquids or foreign objects could result in fire or electrical shock. Use special caution in households where children are present.

If liquids or foreign object should enter the projector, immediately turn off the power switch, disconnect the power plug from the power outlet and contact your dealer.

•Do not place the projector near water (ex. a bathroom, a beach, etc.).

•Do not expose the projector to rain or moisture. Do not place the projector outdoors.

•Do not place flower vases, pots, cups, cosmetics, liquids such as water, etc on or around the projector.

•Do not place metals, combustibles, etc on or around the projector.

•To avoid penetration of foreign objects, do not put the projector into a case or bag together with any thing except the accessories of the projector, signal cables and connectors.

Never disassemble and modify.

The projector contains high voltage components. Modification and/or disassembly of the projector or accessories could result in fire or electrical shock.

•Never open the cabinet.

•Ask your dealer to repair and clean insider.

Do not give the projector any shock or impact.

If the projector should be shocked and/or broken, it could result in an injury, and continued use could result in fire or electrical shock.

If the projector is shocked, immediately turn off the power switch, disconnect the power plug from the power outlet and contact your dealer.

Do not place the projector on an unstable surface.

If the projector should be dropped and/or broken, it could result in an injury, and continued use could result in fire or electrical shock.

•Do not place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand.

•Use the caster brakes placing the projector on a stand with casters.

•Do not place the projector in the side up position, the lens up position or the lens down position.

•In the case of a ceiling installation or the like, contact your dealer before installation.

SG2

Disconnect the

plug from the power outlet.

Do not

disassemble.