Hitachi IP5000 quick start Time, Changing the Configuration

mode=code

Simple change the user.ini line to read:

[3]

name=user%M.ini

mode=code

This will cause the unit to request the ‘loadrun.ini’ and then ‘user000000000000.ini’ for each phone configured. ‘000000000000’ will represent the MAC address of each specific unit.

Changing the Configuration:

∙Prior to making any changes, the Administrator’s Guide and the Web Manual should be consulted.

∙Changes can be made via the web interface or the .ini file can be modified and re- downloaded to the IP5000, noting the issues above regarding environments with multiple units.

∙Examples of the more significant portions of the web interface. This is not a comprehensive web interface tutorial but intended to ensure that all settings required for compatibility with xIC are selected. If a particular section is not shown here, then the defaults were used:

Time

∙Enable NTP

∙Date Format

∙Time Format

∙Time Zone

∙Enable Daylight Saving Time

∙DST Start Month

∙DST Start Day

∙DST Start Hour

∙DST Start Min

∙DST End Month

∙DST End Day

∙DST End Hour

∙DST End Min

∙NTP Refresh Interval (60~3153600)

∙NTP Server1

∙NTP Server2

On Off

Sun DD Jan,YY

24 hours

hours

GMT-05:00

On Off (DST)

4

2

2

0

10

29

2

0

7200

172. 16 . 1 . 2

192. 43 . 244 . 18