JPEG2000 Stand alone DVR User Guide
- 42 -
[SPEED SETUP]
Press  to select and [+] / [-] to change the value.
1.[PAN SPEED]
Set the PANing speed.
2.[TILT SPEED]
Set the TILTing speed.
3.[ZOOM SPEED]
Set the speed of ZOOM IN/OUT.
4.[FOCUS SPEED]
Set the speed of FOCUS NEAR/FAR.
4-7 Factory default
Press  to select and ENTER to turn ON and OFF the selection. Move the cursor
to RUN and press ENTER to execute the Factory Default.
1.[ALL]
Set all the settings back to factory default.
2.[SCREEN DISPLAY]
Set ”SCREEN DISPLAY” back to factory default.
3.[CAMERA COOLR SETUP]
Set ”CAMERA COLOR SETUP” back to factory default.
4.[MOTION SETUP]
Set ”MOTION SETUP” back to fac tory default.
5.[PANTILT SETUP]
Set ”PANTILT SETUP” back to factory default.
6.[SCHEDULE SETUP]
Set ”SCHEDULE SETUP” back to factory default.
7.[CONFIGUATION]
Set ”CONFIGURATION” back to factory default.
4-8 Language
Press [+] / [-] button to select a language.
1. The DVR cannot reset the password to default by running Factory Default.
2. It is stron
l
su
ested to run Factor
Default and HDD CLEAR when
ou install a new hard drive
s
.