JPEG2000 Stand alone DVR User Guide

[MOTION SETUP]

1.[CHANNEL]

Select a channel for the setup.

2.[SENSITIVITY GRADE]

Adjust motion detection sensitivity. 1 (LOW)~4 (VERY HIGH)

3.[MOTION DISPLAY TYPE]

Setup the display type that marks the motion area.

BOX- shows block / CELL- shows green lattice

4.[RECORD DURATION]

[MOTION MASK SETUP]

Note:

Please go to [RECORD SETUP]

>[SCHEDULE RECORD] and change the record mode to MOTION to activiate the MOTION settings,

The DVR record for duration from the time motion is detected. If the DVR detects motion continuosly, the DVR keeps recording through out the event, and the duration after the last motion event. For example, the duration is set to 10 seconds and the motion last for 3 minutes. The DVR records for 3 minutes and 10 seconds.

Users can set up which area to detect motion and which not to detect. The area that is marked not to detect motion is Grey.

Press the number button to select the channel.

Set motion detection area. Use the Direction buttons to move the cursor and press [ENTER] to mark the area.

Press [Mode] to change the editing mode. The editing modes are as below: 1.Cell: Move to the desired location and press [ENTER] to activiate or deactiviate the motion detection in the marked area cell by cell.

2.ALL ON: Change the mode to ALL ON and press ENTER to activate the motion detection in the whole window.

3.ALL OFF: Change the mode to ALL OFF and press ENTER to deactivate the motion detection in the whole window.

4.BLOCK ON: Block an area to activate the motion detection in the desired area. Move the cursor to a corner cell of the desired area and press ENTER to mark the starting cell of the block. Then, move the cursor to the cell at the diagonal end of the desired area and press ENTER to finish marking the block. When the window is at the ALL OFF mode, you can activate the motion detection in the block.

5.BLOCK OFF: Block an area to deactivate the motion detection in the desired area. The setup steps are the same as BLOCK ON. If the window is at the ALL ON mode, you can deactivate the motion detection in the block you make. CELL [1]

Channel Edit mode

- 30 -

Page 30
Image 30
Hitachi JPEG2000 manual Channel, Sensitivity Grade, Motion Display Type, Record Duration, Motion Mask Setup

JPEG2000 specifications

Hitachi JPEG2000 is a high-performance image compression technology that utilizes advanced coding techniques to provide superior image quality while maintaining a smaller file size. It is built upon the JPEG2000 standard, which was developed by the Joint Photographic Experts Group (JPEG) to address limitations in traditional JPEG compression methods, particularly in terms of scalability, quality, and error resilience.

One of the main features of Hitachi JPEG2000 is its use of wavelet compression. Unlike the Discrete Cosine Transform (DCT) employed in standard JPEG, which works on small blocks of images, JPEG2000 utilizes a wavelet transform that allows for multi-resolution analysis of images. This means that images can be compressed at various quality levels, enabling users to access lower-resolution versions without needing to decompress the entire image. This scalability is particularly beneficial for applications like streaming and remote visualization, where bandwidth may be limited.

Another significant characteristic is its superior error resilience. Hitachi JPEG2000 is designed to gracefully handle data corruption that can occur during transmission. This feature is crucial for applications in medical imaging or satellite imagery, where maintaining image integrity is essential. The technology allows for random access to image components, enabling portions of an image to be retrieved without needing to decode the entire file. This capability enhances efficiency when dealing with large datasets.

Additionally, Hitachi JPEG2000 supports lossless compression, meaning that the original image quality can be preserved without any loss of data during compression. This is particularly important for fields such as healthcare, where diagnostic imaging requires absolute precision. The algorithm also offers adjustable compression rates, providing flexibility for different use cases without compromising quality.

The technology is widely implemented in various industries, including broadcasting, film production, and medical imaging, thanks to its ability to deliver high-quality images in a manageable file size. As a versatile solution, Hitachi JPEG2000 stands out with its combination of advanced compression techniques, error resilience, and scalability, making it a preferred choice in an increasingly digital world where efficient data handling is paramount.