Step 1
Step 2
Step 3
Step 4

2Clean skin by washing your face so that makeup and dirt will wash off.

Wipe off makeup with a cleansing product.

3Attach cotton to the body of the device. (Fig.2)

The narrower side of the inner circumference should be upward.

Cotton

(1)Remove the protection seal from the heating head.

 

●Unless the protection seal is removed, the device will not operate. (2)Place cotton over the head and attach it with the included ring.

●Use commercially available cotton. However, small cotton or thick cotton may not work in some cases.

●The ring has an orientation with a clear direction. Attach it from straight above with the wider part of the inner circumference placed toward the heating head.

Do not attach the ring in the reverse direction. Please be careful not to squeeze it, otherwise, it cannot be removed.

4 How to remove the ring. (Fig.3)

Remove the ring by pulling it straight up while holding down the lower part.

5Please observe the following so as not to damage your skin when you use the device.

(1)The maximum amount of time allowed for skin care with use of this device is 8 minutes per day in basic mode. (Limit use of step 1,2,3 to no more than 3 minutes

per day. Limit use of step 4 to no more than once a day.) Basic mode

(HOT CLEANSING)

Automatic shutoff approximate 3 minutes

(HOT MOISTURIZE)

Automatic shutoff

approximate 3 minutes

（HOT MASK）

Automatic shutoff approximate 3 minutes

（COOL）

Automatic shutoff

(Preparation for cooling：approximate 10 seconds) (Time for use: approximate 1 minute and 50 seconds)

●Limit use of the device to no more than 11 minutes per day including use of “HOT MASK.”

●It is recommended that you use “HOT MASK” once a day for milky lotion or once or twice a week for sheet mask.

(2)Use the device on bare skin after removing makeup.

(3)Do not use the device on the same area of skin for more than 10 seconds.

(4)Switch between high and low by pressing the level switch button according to the condition of your skin.

●You can choose high, medium and low as you like. If your skin tingles, use the device on "Low."

●If you feel something unusual with your skin, stop using the device and consult a skin care specialist.

-5-

Page 8 Page 10
Page 9
Image 9
Hitachi KH-186B manual HOT Cleansing
Page 8 Page 10

KH-186B specifications

The Hitachi KH-186B is a robust and versatile piece of construction equipment known for its reliable performance in various earth-moving and material handling applications. This hydraulic excavator is an embodiment of Hitachi's commitment to blending advanced technology with functional design, catering to the needs of operators across construction, mining, and infrastructure development sectors.

One of the standout features of the KH-186B is its powerful engine, which delivers remarkable horsepower while maintaining fuel efficiency. This engine is designed to ensure optimal performance even in demanding conditions, making it suitable for heavy-duty tasks. The sophisticated hydraulic system enhances operational capabilities, providing smooth and precise control, allowing operators to execute even the most intricate operations with ease.

The excavator is equipped with an advanced hydraulic oil cooling system that extends the life of the components, ensuring the machine runs smoothly even during prolonged use. The boom and arm design of the KH-186B allows for an extended reach and digging depth, maximizing productivity in various applications from trenching to lifting heavy materials.

Safety is a focal point in the design of the Hitachi KH-186B. The machine features a spacious and ergonomic cab that provides maximum visibility for operators, reducing blind spots and enhancing safety on the job site. It is also equipped with advanced safety features, including automatic stability control and emergency shut-off systems, ensuring that operators can work confidently and securely.

The KH-186B is not just about power and performance; it is also designed for ease of maintenance. The machine is built with easily accessible components that simplify routine servicing, thereby minimizing downtime and operational costs. Its durable construction ensures a long lifespan, making it a wise investment for contractors and companies looking to enhance their fleet of machinery.

Additionally, the Hitachi KH-186B incorporates the latest technology in terms of telematics, allowing operators and fleet managers to monitor performance metrics in real-time. This data-driven approach provides insights that can lead to improved operational efficiencies and reduced costs.

In conclusion, the Hitachi KH-186B stands out as an exceptional hydraulic excavator characterized by power, efficiency, safety, and intelligence. With its advanced features and robust design, it remains a preferred choice for professionals in the construction and excavation industries, offering a perfect balance of performance and reliability necessary for today’s demanding projects.
Top Page Image Contents