![](/images/backgrounds/200605/200605-2916x1.png)
(7) GAMMA | (CSR: |
Gamma correction is adjusted. |
|
| |
Setting value 80000000h |
|
Gamma correction is set to OFF.
Setting value 820000xx h xx: 00h to FFh (Standard 00h) Adjust the detail gamma.
(8) TRIGGER | (CSR: F0F0 0830 h) |
Sets external trigger operating mode. |
|
| |
Setting value 80000000h |
|
Trigger function set to OFF. |
|
ON
|
| |
Setting value 8xyz0000 h | x:2- LOW ACTIVE, 3- HIGH ACTIVE | (POLARITY) |
| y:0- PORT1, 2- PORT2, E- SOFTTRIGGER | (SOURCE) |
| z:0- MDOE0, 1- MODE1, 3- MODE3, E- MODE14, F- MODE15 (MODE) | |
External trigger signal polarity is switched at value x. Trigger source is switched at value y. Trigger mode | ||
is switched at value z. |
|
|
See "Trigger operation and timing chart" (page 13 to 16). |
| |
(9) TRIGGER DELAY | (CSR: F0F0 0834 h) |
|
Adjust a gap of few time form noticing trigger pulse to starting exposure.
Setting value 80000000 h
Trigger delay is set OFF.
xxx: 000h to FFFh (standard: 000 h)
Adjust the delay time from 000h (0.4μs) to FFFh (3931.6μs) by 0.96μs steps.
(10) SOFTWARE TRIGGER | (CSR: F0F0 0000 h) |
Run software trigger. |
|
| |
Setting value 82000000 h |
|
| |
Setting value 80000000 h |
|
(11) INITIALIZE | (CSR: F0F0 0000 h) |
Return equipment to status at time of release from factory. | |
| |
Setting value 80000000 h |
|
(12) MEMORY SAVE (EXECUTE) | (CSR: F0F0 0618 h) |
Make back up of presently effective memory channels. | |
| |
Setting value 80000000 h |
|
(13) MEMORY SAVE (Ch SET) | (CSR: F0F0 0620 h) |
Select channel carried out memory backup. |
|
Setting value x0000000 h x: 1- ch1, 2- ch2, 3- ch3, 4- ch4
6